Tuesday , December 12 2017

Home / Hip Roof Calculator

# Hip Roof Calculator

Hip Roof Calculator calculates a detail list of roof materials, and a complete estimate. Two ways to determine roof pitch.

## Enter Hip Roof Calculator parameters

Choose metric:

Roof length:

Roof width:

Roof Angle (degrees):

Choose end metric:

### Result:

Roof area:

Roof rise:

Ridge board length:

Hip rafter length:

Common rafter length:

## Steps in construction of hip roof

There are four distinct faces of a hip roof, each on four walls of the house. These are sloped downwards in such a shape that looks like pyramid. Hip roof trusses are pre built wooden frame which are not visible from outside. These trusses are one of the most important parts of hip roof construction because these provide stability during and after construction of hip roof. Following are the important steps that you have to follow to build a beautiful hip roof.

• First of all you must measure and cut the rafters and ridge board.
• After that you have to nail two common rafters on one side of ridge board, then place the ridge board in order and nail the remaining two rafters in place.
• Moving forward you have to measure the corner to ridge rafter to find length of hip rafter.
• You should know attach a string or rope to hip rafter to keep it straight for remaining installation.
• At last you need to measure and then cut jack rafters, attach them with the help of nails on four corners.
• To make sure that these will not break or bend under stress, you should exert some pressure on these.

## Mistakes that can occur while constructing hip roof trusses

There are some common mistakes that may occur during construction of hip roof trusses. Some of those are as follows.

### Improper Material

A common mistake that can cause a lot of danger as well as loss of money is the use of improper material. Improper material means which is not properly sized or having wrong design for your project requirements. So if you have some doubts regarding hip roof trusses, you must consult specialist.

### Measurement Mistakes

Another big issue arises when you measure wrongly. It is a common error that sometime arises because of incorrect reading.

### Installation Errors

Another common mistake that occurs is wrong installation of trusses or rafters. Before finalization you must make sure that all the rafters and trusses are on proper place and angles.
These are some common mistakes that can be avoided if you focus more on your job and do it very carefully. A little negligence can land you in trouble.